BIOGAS FLARE HIDDEN FLAME –  MOD. FE

 

DESCRIPTION

 

This type of flare is designed for the purpose of contain the flame in order not to make it visible from the outside and is adopted when is not required a hight combustion efficiency and its traceability is not required.
The flare consist of a burner installed at elevated position, equipped with a high-energy ignition Pilot and a flame detection system via UV scanner. The combustion air is natural conveyed from the bottom part of flame shield. Incase of specific request it’s possible to get a control system by installing an automatic damper via Termocouple immersed into the combustion chamber zone, automatically modulates the appropiate air flow, ensuring the constant combustion temperature up to a max.un max. di 800 °C (visible and adjustable from control panel).
The supporting structure is composed of a vertical flame shield, (without insulation) and specially sized to contain the flame inside.
The ignition system is automatic type, operated by the electrical panel installed of the flare’s bottom side and initially involves the pilot’s ignition and subsequently the opening of the main Biogas valve.
This Biogas Flare, unlike to elevated type, develop an influential radiation value at ground, since the flame is fully contained within the flame shield.
The gas train and all accessories such as valves, flame arrestor, pressure gauge and other, are installed inside the supporting structure.

SITE UTILITIES

 

Power supply

Volt

400

Auxiliary circuits Power

Volt

230-24

Frequency

Hz

50

Electrical Insulation (Local Panel)

Gr.

IP54

Electrical Protection (Field equipments)

Gr.

IP65

Instrument Air Type

/

Dry, without oil

Instrument Air Dew point

°C

-25

Instrument Air ( Wet, without Oil)

barg

6


DESIGN CODES

73/23/CE et 93/68/CE
EN 60439-1
98/37/CE
EN 746-2
94/9 CE ATEX


SUPPLIER DATA

 

Model

 

FE

Type

 

Hidden Flame

Total Height (from ground)

ml.

4 > 8

Type of support

 

Selfstanding

Gas Pipe Material

 

Aisi 304

Flame Shield

 

Aisi304/309

Burner Material

 

Aisi 316/310

Air Damper Material (if request)

 

Aisi 304

Inlet Flange

 

ANSI B16.5 - 150#

Flame Detector

 

UV Scanner

Internal Insulation

 

N.A.

External Insulation (Only in the Top parts lg. 1 ml.))

 

N.A.